User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-27
Method for Testing Mobile Phone by Automatic Test
This section describes the operation method of the Tester and a
mobile phone under the test by Automatic Test.
1 Turn on the Tester and select the W-CDMA system on the
[Top Menu] screen. Refer to
“System Selection" on
page 4-14 for more details.
2 The [Initial] screen, shown in Figure 4-17, is displayed
after the tester has completed its initialization and
self-test routines.
Figure 4-17 [Initial] Screen