User manual

4-18 N9360A Multi UE Tester W-CDMA User Manual
4 Operating Procedures
Softkey Menu 1
• Automatic Test: Starts the Automatic Test. Refer to
“Testing Mobile Phone Using Automatic Test" on
page 4-25.
• Manual Test: Starts the Manual Test. Refer to “Testing
Mobile Phone Using Manual Test" on page 4-37 for
W-CDMA mode. Refer to “Testing a Mobile Phone by
Manual Test (HSDPA Mode)" on page 4-59 for HSDPA
mode.
• TX Analyzer: Starts the TX Analyzer test. Refer to
“Testing a Mobile Phone by TX Analyzer" on page 4-67.
• Signal Generator: Starts a test with the Signal Generator.
Refer to
“Testing a Mobile Phone by Signal Generator" on
page 4-73.
• More (1 of 2): Displays the softkey menu 2.
• Config: Goes to the [Configuration] screen to set
parameters. Refer to
“Configuration Screen" on
page 5-145.
Softkey Menu 2
• Print Screen: Prints the hard-copy of the screen or stores
the screen image into the USB memory, according to the
"Printer" setting on the [Configuration] screen.
• Return to Menu: This softkey is not for selecting a
function mode. The screen returns to the [Top Menu]
screen when this softkey is pressed. Refer to
“Return to
Menu Screen" on page 5-27 for detail.
• More (2 of 2): Returns to the Softkey Menu 1.