User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-13
5 Press the CURSOR CONTROL knob to return the softkey
menu to that of Step 1.
If the value storage softkey where any value is not
registered is pressed at the input field of RFCH 2, 3, 4, 5 or
6 on the [Auto Test] screen or the [Configuration: Test
Sequence] screen, "----" is displayed at the input field. For
other input fields, the value displayed in the input field
does not change even if the value storage softkey without
registered value is pressed there.
Changing Magnification Softkey
Press the CURSOR CONTROL knob to select a numeric input
field, such as channels and relevancies of amplitude. A changing
magnification softkey as Figure 4-9 is displayed with memory
softkeys. A selected magnification is underlined.
Figure 4-9 Magnification Softkey
Pressing this softkey changes the multiplier from 1 to 1000.
Rotating the CURSOR CONTROL knob clockwise changes the
numeric value in the input field by an increment, and
counterclockwise changes the value by a decrement. The
following multiplies are variable.
• x1: Increment/decrement by 1,
• x10: Increment/decrement by 10,
• x100: Increment/decrement by 100,
• x1000: Increment/decrement by 1000.