User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-11
4 Press the Store Value to Memory>> softkey. The softkey
menu including Memory 1, Memory 2, Memory 3 and Memory
4 softkeys as
Figure 4-7 is displayed.
Figure 4-7 Memory Softkeys
5 Press any of the memory softkeys from Memory 1 to
Memory 4 where you desire to store that value.
6 The memory softkey menu returns to the state in step 2
showing the value newly stored.
7 Press the CURSOR CONTROL knob to set the value into
the field. The softkey menu returns to that of
step 1.
8 Repeat the procedure from step 1 to step 7, if required.