User manual

4-8 N9360A Multi UE Tester W-CDMA User Manual
4 Operating Procedures
Table 4-1 Description of Screen Display Annotation
No. Name Description
1Function Mode
Field
The current function mode, for example, Automatic
Test, Manual Test, TX Analyzer and Configuration, is
displayed in this field.
2 Status Display
Field
The current operation status, for example, Stand-by,
Measuring, Test Sequence and Test Condition, is
displayed in this field.
3 Date/Time Field The current date and time are displayed in this field.
4 Softkey Menu
Field
The softkey labels are displayed in this field. Each
label defines the function of the corresponding
softkey immediately next to the right of the label.
5 Screen Field A variety of information is displayed in this field
depending on the operation status. For example, in
Automatic Test, the following information is displayed
in this field.
a) Test flow: Location Update, MS Call, BS Call, etc.
b) Test results: P (pass) or F (fail).
c) Measurement items: Peak TX Power, Frequency
Error, etc.
d) Measurement results: Pass/Fail or values.
e) Input field: Highlighted fields.
6 Message Field Operation message for test flow steps are displayed in
this field. In this field, the word surrounded by bracket
"[]" denotes the softkey.