User manual

Operating Procedures 4
N9360A Multi UE Tester W-CDMA User Manual 4-7
Test Procedure
Activating the Tester
To activate the Tester, turn on the LINE switch on the rear
panel of the Tester and press the LINE switch on the front
panel.
General Operation
Display Annotation
There are several types of screen used in testing, depending on
the functions and test situations.
Figure 4-5 shows the common areas on a typical screen.
Figure 4-5 Screen Display Annotation
NOTE
Provide warm up of 30 minutes or more to ensure correct measurement.
Press [Start] to begin a test.
Automatic
Test
2037/12/31 23:59
1 2 3 4
c) Measurement Item
d) Measurement Result
e) Input Field
5
Stand-by
6
b) Test Results
a) Test Flow