User manual

Appendix D Parameters of Physical Channels D

N9360A Multi UE Tester W-CDMA User Manual D-3

Modulation is set to Idle + DPCH + H-Set1 to H-Set5, CQI-1 to CQI-30

Table D-16 shows the channel parameter of when the

"Modulation" on the Signal generator screen is set to "IDLE +

DPCH + H-Set1 to H-Set5" or "IDLE + DPCH +CQI-1 to CQI-30".

Spreading code (non-HSDPA)

Spreading codes are set on the Tester as Table D-3.

Table D-3 Spreading Code (non-HSDPA)

Direction Code Channels Signal Generator/TX

Analyzer

Uplink Scrambling Code No. DPCH

* 12.2 kbps DL reference measurement channel on 3GPP TS34.121

Downlink Primary Scrambling

Code

—100

Channelization Code P-CPICH 0

P-CCPCH 1

S-CCPCH 2

PICH 2

DPCH

†

† 12.2 kbps UL reference measurement channel on 3GPP TS34.121