User manual

D-2 N9360A Multi UE Tester W-CDMA User Manual
D Appendix D Parameters of Physical Channels
Physical Channel Parameters of Signal Generator
The following shows the parameters of the physical channels for
each parameter of Modulation on the TX Analyzer and the Signal
Generator screen.
Modulation is set to Idle
Table D-1 shows the channel parameter of when the Modulation
on the TX Analyzer and the Signal Generator screen is set to
IDLE.
Modulation is set to Idle + DPCH
Table D-2 shows the channel parameter of when the Modulation
on the TX Analyzer and the Signal Generator screen is set to
IDLE + DPCH (PN9) or IDLE + DPCH (PN15).
Table D-1 Channel Parameter (IDLE)
Physical Channel Power
Ior: RF Output Level Amplitude
CPICH CPICH_Ec / Ior = –3.3 dB
P-CCPCH + SCH (P-CCPCH_Ec + SCH_Ec) / Ior = –5.3 dB
PICH PICH_Ec / Ior = –8.3 dB
S-CCPCH S-CCPCH_Ec / Ior = –10.3 dB
Table D-2 Channel Parameter (IDLE + DPCH)
Physical Channel Power
Ior: RF Output Level Amplitude
CPICH CPICH_Ec / Ior = –3.3 dB
P-CCPCH + SCH (P-CCPCH_Ec + SCH_Ec) / Ior = –5.3 dB
PICH PICH_Ec / Ior = –8.3 dB
DPCH
*
* 12.2 kbps DL reference measurement channel on 3GPP TS34.121
DPCH_Ec / Ior = –10.3 dB