User manual

3-4 N9360A Multi UE Tester W-CDMA User Manual
3 Overview
Features
1 Easy-to-operate Automatic Test
The tests from call processes to radio performance tests are
executed automatically with easy operation. Each test item in
Automatic Test can be set to either On or Off. Testing time can
be shortened by setting unnecessary test items to Off.
2 Shortening of testing time
In Automatic Test, tests are executed while preset traffic
channels are automatically handed over. Consequently,
retesting for each traffic channel is not required, and testing
time can be shortened.
3 Various test functions
This product can meet the needs in every inspection process
with Manual Test and Signal Generator function.
4 Extensive interfaces
Ethernet, USB, GP-IB (Option E00) and Serial (Option E01) are
prepared. The USB ports are used to connect a printer, a
USB-GPIB converter (Option E02) or a USB memory device for
firmware update, saving and recalling Test Setup files, or saving
screen images. Ethernet, GP-IB and Serial are used for remote
control.
5 External control function (Remote control)
Remote control is available using Ethernet, GP-IB (Option E00
or Option E02) or Serial (Option E01). Each communication
port uses same commands. A communication port which adapts
to user's equipment is selectable.
6 System Handover to GSM
System Handover from W-CDMA to GSM (Option) can be
executed. This function is available for both Automatic Test and
Manual Test.