User manual

5-186 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Replace Now HDD < USB: Copies all the test parameter files from
the USB memory device to the HDD.
Cancel: Cancels copying and returns to the [Configuration: File
Management] Screen as Figure 5-59 on page 5-168.
Screen Field
The following message is displayed in the screen field.
"The selecting procedure file is copied from a USB memory device to
the hard disk. When this operation is done, all existing procedure
files in hard disk are deleted."
Undo Confirmation (HDD is selected)
You can restore all replaced files using Undo function when you
replaced all the test parameter files from a USB memory device
to the HDD. Select the "HDD" with the HDD/USB softkey, and
then, press the More (1 of 2) and Undo softkeys on the
[Configuration: File Management] screen. Undo Screen (HDD is
selected) shown in Figure 5-73 is displayed.
NOTE
Can restore all replaced files using the Undo function when you replace
all test parameter files from the HDD to a USB memory device. Refer to
“Undo Confirmation (HDD is selected)" on page 5-186 for details.
If copying operation is failed, the [File Management] screen is displayed
and an error message is displayed in the message field. Refer to
Table 5-52, “Error Message in File Management,” on page 5-170.
NOTE
After this operation, all existing test parameter files in the HDD are
deleted.