User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-183
Replacing Test Setup Files (HDD is selected)
When copying all the test parameter files to a USB memory
device, select the "HDD" with the HDD/USB softkey, and then,
press the More (1 of 2) and File Replace HDD > USB softkeys on the
[Configuration: File Management] screen. Then, the File
Replace Screen (HDD is selected) shown in Figure 5-71 is
displayed.
Figure 5-71 File Replace Screen (HDD is selected)
Softkey Menu Field
Softkey Menu 1
Replace Now HDD > USB: Copies all the test parameter files from
the HDD to a USB memory device.
NOTE
After this operation, all existing test parameter files in the USB memory
device are deleted.