User manual

5-180 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Deleting Test Setup File
1 To delete a file containing test parameters from a USB
device, go to
step 2. Otherwise, go to step 3 to deleted from
the HDD.
2 Insert a USB memory device into the USB connector to
obtain the parameter file list.
3 Select a device from which you want to delete a test
parameter file by pressing the HDD/USB softkey. The selected
device, either "HDD" or "USB", is underlined.
4 Move the cursor to the file number of which you want to
delete the test parameter file.
Figure 5-68 [Configuration File Management] Delete-1 Screen
5 Press the Delete softkey, and then the "Filename", "Date",
"Time" and "Comment" fields are highlighted.