User manual

5-176 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
Yes: Executes saving the parameter file.
No: Returns to the condition before selecting the file.
Message field
"A same name file already exists. Ok to save?"
Recalling Test Setup File
1 If you recall a file including test parameters from a USB
memory device, go to
step 2. Or, go to step 3 to recall a file
from the HDD.
2 Insert a USB memory device into the USB Connector on the
front panel of the Tester.
3 Select a device you use to recall a test parameter file by
pressing the HDD/USB softkey. The selected device, either
"HDD" or "USB", is underlined.
4 Move the cursor to the file number of which you want to
recall the test parameter file.