User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-171
Saving Test Setup File
1 If you save a file including all parameters that are currently
set in a USB memory device, go to
step 2. Or, go to step 3 to
save a file in the HDD.
2 Insert a USB memory device into the USB Connector on the
front panel of the Tester.
3 Select a device you want to use to save a test parameter file
by pressing the HDD/USB softkey. The selected device, either
"HDD" or "USB", is underlined.
4 Move the cursor to the file number to which you want to save
a new test parameter file.
Figure 5-60 [Configuration: File Management] Save-1 Screen
5 Press the Save softkey. The "Filename" and "Comment" fields
are highlighted, and the cursor is placed at the "Filename"
field. At this time, a default file name is automatically
displayed in the "Filename" field. If you want to change the
file name, go to
step 6. If you do not want to change the file
name, go to step 9.