User manual

5-164 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Setting Measurement Limits on Measurement Items
The "LO Limit" and "HI Limit" values for the measurement items
in Table 5-50 need to be set to execute Pass/Fail tests with
Manual Test. Limits can be specified in all measurement items
of test set on the [Configuration: Test Sequence] screen (even if
some test items are skipped).
The changing magnification softkey is available. Refer to “Storing
Numeric Values"
on page 4-10 and “Changing Magnification
Softkey"
on page 4-13.
Table 5-50 [Configuration: Test Condition] Screen Test Limits
Measurement Items Description
Throughput R Sets the low test limit.
The allowable range is from 0 to 99999kbps in 1kbps
step.
Median CQI Sets the high and low test limit,
The allowable range is from 0 to 30 in 1 step.
CQI variance Sets the low test limit.
The allowable range is from 0.00 to 99.99% in 0.01%
step.