User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-161
ILP (Up Min) Sets a high and a low test limit.
The allowable range is from -99.99 to +99.99dB in 0.01 dB steps.
ILP (Up Max) Sets a high and a low test limit.
The allowable range is from -99.99 to +99.99dB in 0.01 dB steps.
ILP (10 Slots Down) Sets a high and a low test limit.
The allowable range is from -99.99 to +99.99dB in 0.01 dB steps
ILP (10 Slots Up) Sets a high and a low test limit.
The allowable range is from -99.99 to +99.99dB in 0.01 dB steps
MAX TX Power Sets a high and a low test limit.
The allowable range is from -99.99 to +99.99dBm in 0.01 dB steps
Frequency Error Sets a high and a low test limit over the active part of the timeslot.
The allowable range is from -999.9 to +999.9Hz in 0.01Hz steps.
EVM Sets a high limit. The allowable range is 0.00 to 99.99% in 0.01% steps.
Origin Offset Sets a high limit. The allowable range is -99.99 to 0.00dB in 0.01dB steps.
Sensitivity/BER Sets a high limit. The allowable range is 0.00 to 99.99 % in 0.01 % steps.
MIN TX PowerSets the low and high limits of minimum TX power. The allowable range is -99.99 to
+99.99 dBm in 0.01 dB steps.
ACLR DSB 5 MHz Sets a high limit. The allowable range is -99.99 to +0.00 dB in 0.01 dB steps.
This is displayed when the Option W07 is installed in the Tester.
ACLR DSB 10 MHz Sets a high limit. The allowable range is -99.99 to +0.00 dB in 0.01 dB steps.
This is displayed when the Option W07 is installed in the Tester.
OBW Sets a high limit. The allowable range is 0.00 to -9.99 MHz in 0.01 MHz steps.
This is displayed when the Option W07 is installed in the Tester.
Table 5-48 [Configuration: Test Condition] Screen Test Limits
Measurement Items Description