User manual

5-150 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Configuration: Test Sequence Screen
When the Test Seq uen ce softkey on the [Configuration] screen is
pressed, the [Configuration: Test Sequence] screen. as
Figure 5-54 is displayed.
Configure a test condition for Automatic Test on this screen.
The attenuation values set in the [Configuration] screen are
used for correcting the path losses between the mobile phone
and the Tester for each band; however, if the attenuation has
frequency or channel dependency in one band, you can
compensate the RF test results with the attenuation values of
"ATT In" and "ATT Out" setting on this screen.
Figure 5-54 [Configuration: Test Sequence] Screen