User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-149
† The changing magnification softkey is available. Refer to “Storing Numeric Values" on
page 4-10 and “Changing Magnification Softkey" on page 4-13.
Other display items are shown in Table 5-45.
Printer Sets the output device of print screen to "USB Memory" or "EPSON PM-G800".
• USB Memory: Saves an image file of screen into a USB memory device. The image format is
PNG.
• EPSON PM-G800: Prints a hardcopy of screen in the specified printer.
Beeper Sets beep. Selects "On" or "OFF".
• On: Beeps for each step of operation.
• OFF: Beeps are suppressed.
Table 5-44 [Configuration] Screen Input Field
Input Field Description
Table 5-45 [Configuration] Screen Information
Item Information Description
Reference Displays the reference signal source in use.
The reference signal source cannot be changed on this screen.
To change the setting, go to [Top Menu] screen and select the [Configuration] screen. Refer to
“Configuration" on page 5-145 for details.
• Internal: The internal 10 MHz reference signal is used.
• External: The external 10 MHz reference signal is used. The 10 MHz reference signal must be
supplied to the "10 MHz Reference IN" connector on the rear panel.
Serial No. Displays the serial number of the Tester.
RF-CPU Displays the revision information of RF-CPU.
MC-1x Displays the revision information of MC-1x CPU.
This information is displayed when C00 and C01 options are installed.
1xEV-DO Displays the revision information of 1xEV-DO CPU.
This information is displayed when C00, C01 and C02 options are installed.
Option Displays the option numbers installed in the Tester with three digit alphanumeric characters.