User manual

5-148 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
The input fields needed to generate RF signals are described in
Table 5-44. Set the input fields accordingly to generate RF
signals.
Table 5-44 [Configuration] Screen Input Field
Input Field Description
Procedure Displays a list of parameter file of Configuration that is stored in the Tester.
Select a file to recall parameters for a test.
If the Tester is using a parameter file, the file name is displayed in this field.
Panel Key Restricts the acceptance of system setting on the front panel of the Tester.
Selects "Lock" or "Unlock".
• Lock: The following functions are unavailable.
• Manual Test, TX Analyzer, Signal Generator
• Changing for TCH and BCCH settings in Automatic Test
• Tes t Seq uen ce , Test C on d iti on, a nd Fil e Management in the Configuration mode.
• Unlock: No restriction for setting on the front panel of the Tester.
Serial Port † Sets the serial (RS-232C) port communication condition to use external control. This function is
unavailable without Option E01.
• Baud Rate: Sets communication speed to 9600, 19200, 38400, 57600 or 115200 bits per
second.
• Data Length: Sets data bit length to 7 or 8 bits.
• Stop Bits: Sets stop bit length to 1, 1.5 or 2 bits.
• Parity: Sets parity check mode to "None", "Odd" or "Even".
• Xcontrol: Sets flow control to "None" or "Xon/Xoff".
Reboot the Tester after changing Serial Port setting.
GP-IB † Sets GP-IB port condition. This function is unavailable without Option E00 or Option E02.
• Address: Sets the address. The allowable range is from 1 to 15.
• EOI: Sets EOI control. Select "On" or "Off".
• On: Enables EOI control. (Terminate character is invalid).
• Off: Disables EOI control. (Terminate character is valid).
Reboot the Tester after changing GP-IB setting.
Ter mina tor
• Sets a terminator of output text data to "CR", "LF" or "CR+LF". This is the Terminator
outputted from the Tester. This setting is used for remote control with Serial, Ethernet and
GP-IB. (The Terminator of input text data is LF)
• The Terminator of input text data for GPIB option E00 : set to CR+LF for GPIB option E02 : set
to LF.
Date/Time † Date/Time*Sets the current date and time in the following formats:
• YYYY: Sets the year. The allowable range is from 1990 to 2037.
• MM: Sets the month. The allowable range is from 01 to 12.
• DD: Sets the day. The allowable range is from 01 to 31.
• HH: Sets the hour. The allowable range is from 00 to 23.
• MM: Sets the minute. The allowable range is from 00 to 59.