User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-145
Configuration
Overview
There are four major functions in this mode:
Configuration
Test Sequence Configuration
Test Condition Configuration
File Management
Configuration Screen
When the Config softkey is pressed on the [Initial] screen, the
[Configuration] screen as Figure 5-51 is displayed.
The following various condition are set on the [Configuration]
screen:
• Execution sequence of Automatic Test
• Test parameters
• Relevant to I/F
• Other setting
NOTE
For numeric value entry, the changing magnification softkey menu is
available. Refer to “Storing Numeric Values" on page 4-10 and “Changing
Magnification Softkey" on page 4-13.