User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-143
RFCH † Sets the downlink channel number to generate the signal. Each band symbol corresponds to a
band as follows.
• B1: Band 1
• B2: Band 2
• B3: Band 3
• B4: Band 4
• B5: Band 5
• B6: Band 6
The allowable range is as follows:
• Band 1:10550 to 10850 (2110.0 MHz to 2170.0 MHz)
• Band 2: 9650 to 9950 (1930.0 MHz to 1990.0 MHz)
412 (1932.5 MHz), 437 (1937.5 MHz),
462 (1942.5 MHz), 487 (1947.5 MHz),
512 (1952.5 MHz), 537 (1957.5 MHz),
562 (1962.5 MHz), 587 (1967.5 MHz),
612 (1972.5 MHz), 637 (1977.5 MHz),
662 (1982.5 MHz), 687 (1987.5 MHz)
• Band 3: 9025 to 9400 (1805.0 MHz to 1880.0 MHz)
• Band 4: 10550 to 10775 (2110.0 MHz to 2155.0 MHz)
1462 (2112.5 MHz), 1487 (2117.5 MHz),
1512 (2122.5 MHz), 1537 (2127.5 MHz),
1562 (2132.5 MHz), 1587 (2137.5 MHz),
1612 (2142.5 MHz), 1637 (2147.5 MHz),
1662 (2152.5 MHz)
• Band 5: 4345 to 4470 (869.0 MHz to 894.0 MHz)
1007 (871.5 MHz), 1012 (872.5 MHz),
1032 (876.5 MHz), 1037 (877.5 MHz),
1062 (882.5 MHz), 1087 (887.5 MHz)
• Band 6: 4375 to 4425 (875.0 MHz to 885.0 MHz)
1037 (877.5 MHz), 1062 (882.5 MHz)
Amplitude † Sets the RF output level. The allowable range is from -115.0 to -18.0 dBm in 0.1 dB steps.
Modulation ‡ Sets the modulation mode from the followings:
• Off: Outputs carrier wave without modulation.
• IDLE: Outputs CPICH, P-CCPCH, SCH, PICH and S-CCPCH.
• IDLE+DPCH(PN9): Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN9).
• IDLE+DPCH(PN15): Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN15).
• IDLE+DPCH(PN15) + H-Set1 to H-Set5(PN15, QPSK or 16QAM)
Outputs IDLE (without S-CCPCH) + RMC 12.2 kbps(PN15) HSDPA(H-Set1 to H-Set5, PN15)
• IDLE+DPCH(PN15) + CQI-1 to CQI-30(PN15, QPSK or 16QAM)
Outputs IDLE (without S-CCPCH) + RMC 12.2 kbps(PN15) HSDPA(CQI-1 to CQI-30, PN15)
Refer to Ta ble 5-2 9.
Table 5-43 [Signal Generator] Screen Input Field
Input Field Description