User manual

5-140 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Signal Generator
Overview
The purpose of the Signal Generator is to generate W-CDMA and
HSDPA (when the Option W06 is installed) compliant RF
signals.
Signal Generator Screen
When the Signal Generator softkey on the Initial screen is
pressed, the Signal Generator screen shown inn Figure 5-50 is
displayed.
NOTE
Install the Option W06 when using the HSDPA function.
If the RF-CPU software revision is previous revision of 1.10 or before,
setting range of the Amplitude is from -110.0 dBm to -20.0 dBm.
For numeric value entry, the changing magnification softkey menu is
available. Refer to “Storing Numeric Values" on page 4-10 and “Changing
Magnification Softkey" on page 4-13.