User manual

5-138 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
RFCH † Sets the uplink channel number to execute a test.
A band symbol is also displayed. Each band symbol corresponds to a band as follows.
• B1: Band 1
• B2: Band 2
• B3: Band 3
• B4: Band 4
• B5: Band 5
• B6: Band 6
The allowable range is as follows:
• Band 1:9600 to 9900 (1920.0 MHz to 1980.0 MHz)
• Band 2: 9250 to 9550 (1850.0 MHz to 1910.0 MHz)
12 (1852.5 MHz), 37 (1857.5 MHz),
62 (1862.5 MHz), 87 (1867.5 MHz),
112 (1872.5 MHz), 137 (1877.5 MHz),
162 (1882.5 MHz), 187 (1887.5 MHz),
212 (1892.5 MHz), 237 (1897.5 MHz),
262 (1902.5 MHz), 287 (1907.5 MHz)
• Band 3: 8550 to 8925 (1710.0 MHz to 1785.0 MHz)
• Band 4: 8550 to 8775 (1710.0 MHz to 1755.0 MHz)
1162 (1712.5 MHz), 1187 (1717.5 MHz),
1212 (1722.5 MHz), 1237 (1727.5 MHz),
1262 (1732.5 MHz), 1287 (1737.5 MHz),
1312 (1742.5 MHz), 1337 (1747.5 MHz),
1362 (1752.5 MHz)
• Band 5: 4120 to 4245 (824.0 MHz to 849.0 MHz)
782 (826.5 MHz), 787 (827.5 MHz),
807 (831.5 MHz), 812 (832.5 MHz),
837 (837.5 MHz), 862 (842.5 MHz)
• Band 6: 4150 to 4200 (830.0 MHz to 840.0 MHz)
812 (832.5 MHz), 837 (837.5 MHz)
Amplitude † Sets the RF output level of the Tester. The allowable range is from -115.0 to -18.0 dBm in 0.1 dB
steps.
Modulation ‡ Sets the modulation mode from the followings:
• IDLE: Outputs CPICH, P-CCPCH, SCH, PICH and S-CCPCH.
• IDLE+DPCH(PN9): Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN9).
• IDLE+DPCH(PN15): Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN15).
• IDLE+DPCH(PN9)+OCNS: Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN9)+OCNS.
• IDLE+DPCH(PN15)+OCNS: Outputs IDLE (without S-CCPCH) Ç RMC 12.2kbps(PN15)+OCNS.
This Modulation setting works with the one on the [Signal Generator] screen. This is set to IDLE
when the [TX Analyzer] screen is displayed while the "Modulation" field on the [Signal
Generator] screen is set to "Off" or Modulation for "HSDPA" is set.
Refer to Ta ble 5-2 9.
Table 5-42 [TX Analyzer: Measurement] Results Screen Input Field Descriptions (continued)
Input Field Description