User manual

5-136 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Figure 5-49 [TX Analyzer: Stand-by] Measurement Result Screen (with Option W07)
Softkey Menu Field
Softkey Menu 1
RF Output On/Off: Selects the RF power output from "On" and
"Off". "RF On" is displayed at the lower left corner on screen
when this is set to "On". This RF Output On/Off setting works
with the one on the [Signal Generator] screen.
Trigger Sing/Cont: Selects the trigger mode from "Sing" (single)
and "Cont" (continuous).
• The "Sing" mode setting provides single measurement.
• The "Cont" mode setting provides continuous measurement.
Trigg er : Starts single measurement.