User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-135
Message Field
The following message is displayed in the message field on the
Measuring screen:
"Press the desired softkey."
Measurement Result Screen
When measurement is completed, a [Stand-by] Measurement
Result screen in stand-by mode is displayed.
The measurement results and Pass/Fail results are shown right
next to the measurement items.
• "Pass" is shown on blue background when the measurement
result is passed.
• "Fail" is shown on red background when the measurement
result is failed.
TX Power is measured without limits; therefore, "-" is shown in
its Pass/Fail result cell.