User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-133
Explanation
The measurement starts in the following way:
When the trigger mode is set to Sing,
• Press the Tr igger softkey on the Stand-by screen to start
single measurement on the Measuring screen.
• Press the Trigger Sing/Cont softkey on the Stand-by screen to
change the trigger mode from Sing to Cont in order to start
continuous measurement.
When the trigger mode is set to Cont,
• Continuous measurement starts on a Measuring screen as
soon as the screen of TX Analyzer is displayed.
Measuring Screen
When the measurement starts, a [Measuring] screen is
displayed. Figure 5-48 is the [Measuring] screen on the
standard Tester, Figure 5-49 is the [Measuring] screen on the
Tester equipped with the Option W07, Figure 5-48 is the
[Measuring] screen on the Tester equipped with the Option
W09, and Figure 5-49. is the [Measuring] screen on the Tester
equipped with the Option W07 and Option W09.