User manual

5-130 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Trigg er : Starts single measurement.
More (1 of 2): Displays the softkey menu 2.
Return: Returns to the [Initial] screen.
Softkey Menu 2
Print Screen: Prints a hardcopy of the screen or saves an image
file of the screen into a USB memory device depending on the
setting on the "Printer" input field on the [Configuration]
screen.
System>>: Displays softkey menu 3 to select system.
More (2 of 2): Returns to the softkey menu 1.
Softkey Menu 3
GSM: Changes the system to GSM. The G00 Option is required.
W-CDMA: This softkey is unavailable.
CDMA2000: Changes the system to cdma2000. The C00, Option,
C01 Option and C02 Option are required.
Cancel: Cancels selecting system and returns to the softkey
menu 2.
Screen Fields
Set the input fields in the screen field according to the following
description of Table 5-41 to execute a new test.
Table 5-41 [TX Analyzer: Stand-by] Screen Input Field
Input Field Description
Measurement item
selection
Sets whether or not to execute a group of measurement items or each measurement item as
follows.
• TX Power
• Frequency Error
• EVM, Origin Offset
• ACLR DSB 5 MHz, ACLR DSB 10 MHz (with the Option W07)
• OBW(with the Option W07)
Selects "On" or "Off".
• On: Executes the measurement item.
• Off: Skips the measurement item.