User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-125
The information from the mobile phone and the Tester as
Table 5-37 is displayed.
Also, the followings are displayed in the screen field.
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are currently
set on the Configuration: Test Condition screen are displayed
at the lower-right corner of the screen.
• RF On indicator
RF On indicator is displayed at the lower-left corner of the
screen only when the RF signal from the Tester is output to
the RF In/Out connector.
Message Field
The following message is displayed in the message field in the
Measuring screen:
"Press [BS Call]"
The word surrounded by [ ] in the message field denotes the
softkey.
Table 5-37 [Manual Test] Mobile Phone Information
Item Description
IMSI Displays the International Mobile Subscriber Identity.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
UE Category Displays UE Category.
PRACH Power Displays the PRACH power sent from the mobile
phone.
ACK Displays the number of ACK from the beginning to the
interim reporting or the end of the measurement.
NACK Displays the number of NACK frm the beginning to the
interim reporting or the end of the measurement.
DTX Displays the number of DTX from the beginning to the
interim reporting or the end of the measurement.
CPICH RSCP Displays the CPICH received code power reported
from the mobile phone.