User manual

5-118 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
The information from the mobile phone and the Tester as
Table 5-35 is displayed.
CPICH RSCP Screen
When the Measurement CPICH RSCP softkey is pressed at the
Connection step, the Tester gets the mobile phone report the
value of CPICH RSCP.
When the "CPICH RSCP" input field is set to "ON", the CPICH
RSCP report is enabled.
After informing the CPICH RSCP report once, the Tester shows
the value.
Figure 5-44 shows the CPICH RSCP screen during reporting.
Table 5-35 [Manual Test] Connection Screen Mobile Phone Information
Item Description
IMSI Displays the International Mobile Subscriber Identity.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
UE Category Displays UE Category.
PRACH Power Displays the PRACH power sent from the mobile
phone.
ACK Displays the number of ACK from the beginning to the
interim reporting or the end of the measurement.
NACK Displays the number of NACK from the beginning to
the interim reporting or the end of the measurement.
DTX Displays the number of DTX from the beginning to the
interim reporting or the end of the measurement.
CPICH RSCP Displays the CPICH received code power reported
from the mobile phone.