User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-113
† The changing magnification softkey is activated. Refer to “Storing Numeric Values" on
page 4-10 and “Changing Magnification Softkey" on page 4-13.
The information from the mobile phone and the Tester as
Table 5-33 is displayed in the screen field.
CPICH RSCP Sets whether or not to display the CPICH RSCP value reported by a mobile phone.
Select "On" or "Off".
• On: Displays the CPICH RSCP value. Activates the
Measurement CPICH RSCP softkey in the Connection status.
• Off: Not display the CPICH RSCP value.
When it is set to "On" in the [Stand-by] status and MS or BS call is started, CPICH RSCP is
reported once and displayed on the screen.
OCNS Sets the OCNS.
The setting is fixed to "ON".
Table 5-32 [Manual Test] Connection Screen Input Field
Input Field Description
Table 5-33 [Manual Test] Connection Screen Mobile Phone Information
Item Description
IMSI Displays the International Mobile Subscriber Identity.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
UE Category Displays UE Category.
PRACH Power Displays the PRACH power sent from the mobile phone.
ACK Displays the number of ACK at the end of the
measurement.
NACK Displays the number of NACK at the end of the
measurement.
DTX Displays the number of DTX at the end of the
measurement.
CPICH RSCP Displays the CPICH received code power reported from
the mobile phone.