User manual

5-108 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Explanation
When location update is passed, "P" is shown on blue
background.
After that, press the BS Call softkey to continue the test process.
When above procedure is performed, the screen changes to a
[Measuring] screen, and the test on the mobile phone starts.
When the BS Call softkey is pressed, the "BS Call" step in the test
flow is highlighted, and then the following test result is shown
in the field right next to the "BS Call" step.
• "P": Shown on blue background when call setup is executed
properly and BS Call is passed.
• "F": Shown on red background when BS Call is failed.
Connection Screen
When BS Call is succeeded, the Tester becomes in the
Connection status and a [Measuring] Connection screen as
Figure 5-42 is displayed.
• When the Trigger Sing/Cont softkey is set to "Cont", continuous
measurement starts as soon as the [Measuring] Connection
screen is displayed.
• When the Trigger Sing/Cont softkey is set to "Sing", press the
Trigg er softkey to start single measurement.