User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-107
Also, the followings are displayed in the screen field.
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are currently
set on the [Configuration: Test Condition] screen are
displayed at the lower-right corner of the screen.
• RF On indicator
"RF On" indicator is displayed at the lower-left corner of the
screen only when the RF signal from the Tester is output to
the RF In/Out connector.
Table 5-31 [Manual Test: Location Update] Screen Mobile Phone
Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
UE Category Displays UE Category.
PRACH Power Displays the PRACH power sent from the mobile
phone.
ACK Displays the number of ACK at the end of the
measurement.
NACK Displays the number of NACK at the end of the
measurement.
DTX Displays the number of DTX at the end of the
measurement.
CPICH RSCP Displays the CPICH received code power reported
from the mobile phone.