User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-105
Also, the followings are displayed in the screen field.
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are currently
set on the [Configuration: Test Condition] screen are
displayed at the lower-right corner of the screen.
• RF On indicator
RF On indicator is displayed at the lower-left corner of the
screen only when the RF signal from the Tester is output to
the RF In/Out connector.
Message Field
The following message is displayed in the message field in the
Measuring screen:
"Press [BS Call]"
The word surrounded by [ ] in the message field denotes the
softkey.
Explanation
Location Update can be started by the following way;
• Turn the mobile phone on and then location update starts
automatically.
Location Update Screen
When the mobile phone is turned on at the Stand-by screen,
location update is started. After completion of location update,
the display status returns to Stand-by.