User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-99
Softkey Menu Field
Softkey Menu 1
BS Call: Executes BS Call.
Clear Status: Clears Pass/Fail measurement results at signaling
steps in the test flow.
Trigger Sing/Cont: Selects the trigger mode from "Sing"(single)
and "Cont"(continuous).
• The "Sing" mode setting provides single measurement of RF
Test.
• The "Cont" mode setting provides continuous measurement
of RF Test.
Trigg er : This softkey is inactivated on the [stand-by] screen. This
softkey is activated in the Connection status to start
measurement.
More(1 of 2): Displays the softkey menu 2.
Return: Returns to the [Initial] screen.
Softkey Menu 2
Print Screen: Prints a hardcopy of the screen or saves a screen
image in the USB memory device depending on the setting of
the "Printer" input field on the [Configuration] screen.
RF Output On/Off: Selects the RF power output from "On" and
"Off". When it is set to "On", it is set to the value of BS Level.
When it is set to "OFF", the value is set below -120 dBm.
System >>: Displays softkey menu 3 to select system.
More (2 of 2): Returns to the softkey menu1.
Softkey Menu 3
GSM: Changes the system to GSM. The G00 Option is required.
GPRS: Changes the system to GPRS. The G00 Option is required.
EGPRS: Changes the system to EGPRS. The G03 Option is
required.
W-CDMA: Changes the system to W-CDMA.
HSDPA: This softkey is unavailable.
CDMA2000>>: Displays the softkey menu 4 to select system of
cdma2000.