User manual

5-94 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
The following are also displayed on the screen field:
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are
currently set on the Configuration: Test Condition
screen are displayed at the lower-right corner of the
screen.
• RF On indicator
"RF On" indicator at the lower-left corner of the screen is
displayed only when the RF signal from the tester is
output to the RF In/Out connector.
Message Field
The following message is displayed in the message field:
"Press [SMSMT] or dial and call from the mobile."
The word surrounded by [ ] in the above message field denotes
softkey.
Receive Message Displays the short message received from the mobile
phone. The number of sendable character is up to 160
characters. (text data)
If the message is binary data, "Binary Data" is displayed.
Send Message Displays the message sent to the mobile phone. The
number of sendable character is up to 160 characters. (text
data)
If the message is binary data, "Binary Data" is displayed.
Table 5-26 [Manual Test] SMS Information
Item Information Description
NOTE
Remote Control application is required to change the SMS send data