User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-93
† The changing magnification softkey is activated. Refer to “Storing Numeric Values" on
page 4-10 and “Changing Magnification Softkey" on page 4-13.
The information from the mobile phone and the tester, as shown
in Table 5-26, is displayed at the lower left corner in the screen
field.
Caller ID Sets if the Tester displays an addresser number on the screen or not.
• On: Displays the number
• Off: Not display the number
To change the Caller ID, remote control application (provided by user) is required.
Averaging Averages respective measurement values of Frequency Error and EVM.
Set the averaging number from 2 to 99 or "Off".
When this function is not required, select "Off".
BER Frames a Sets the number of test frames for BER measurement. The allowable range is from 1 to 4100 in
1 step. (1 Frame = 1 TTI)
Also, a bit number according to BER Frames is displayed between parentheses. The bit number
is calculated by an equation "BER Frames multiplied by 244". While BER Frames is entered, The
bit number is displayed in conjunction with the value of BER Frames.
CPICH RSCP Sets whether or not to make the mobile phone report the value of CPICH RSCP.
Select "On" or "Off".
• On: The value of CPICH RSCP is reported and also the Measurement CPICH RSCP softkey is
activated in the connection status.
• Off: The value of CPICH RSCP is not reported.
If this is set to "On" in the Stand-by status, the value of CPICH RSCP is reported once after MS
or BS call is started and displayed on screen.
Table 5-25 [Manual Test] SMS Screen Input Field
Input Field Description
Table 5-26 [Manual Test] SMS Information
Item Information Description
IMSI Displays the default value of International Mobile
Subscriber Identity received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call
execution.
Dialed No. Displays the dialed number received from the mobile
phone at MS call execution.