User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-89
The following are also displayed on the screen field:
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are
currently set on the Configuration: Test Condition
screen are displayed at the lower-right corner of the
screen.
• RF On indicator
"RF On" indicator at the lower-left corner of the screen is
displayed only when the RF signal from the tester is
output to the RF In/Out connector.
Message Field
The following message is displayed in the message field on the
Measurement Result screens:
"Press [Location Update], [BS Call] or dial and call from the mobile."
The words surrounded by [ ] in the above message field denotes
the softkey.