User manual

5-82 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Message Field
The following message is displayed on the Measuring screen:
"Processing…"
Measurement Result Screen
When measurement is completed, a [Measuring] Measurement
Result screen is displayed.
• To end the test in BS Call connection, press the Release
softkey to disconnect from the Tester.
• To end the test in MS call connection, press an On Hook
button on the mobile phone to disconnect from the mobile
phone.
When the disconnection is completed, a [Stand-by]
Measurement Result screen is displayed.
• RF test can be executed only at the Connection (RMC) step.
Measurement result values of RF test are shown next to the
measurement item cells, and Pass/Fail results are also shown
right next to those measurement result values. Refer to
Figure 5-36.
• RF test is not executed at the Connection (AMR) step. The
Pass/Fail results of relevant test items in the test flow are
shown next to those items. Refer to
Figure 5-37.
• “Pass" is shown on blue background when the measurement
result is passed. Or, "Fail" is shown on red background when
the measurement result is failed.