User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-81
Message Field
The following message is displayed on the Measuring screen:
"Press the desired softkey."
CPICH RSCP Screen
At the Connection step, when the Measurement CPICH RSCP
softkey is pressed, the Tester makes the mobile phone report
the value of CPICH RSCP.
Set the "CPICH RSCP" input field to "On" in order to enable the
CPICH RSCP report.
The value is displayed after one CPICH RSCP report.
Figure 5-35 is the screen during CPICH RSCP report in the BS
call RMC connection status.
Figure 5-35 [Manual Test: Measuring] CPICH RSCP Screen