User manual

5-80 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Measuring Screen
At the Connection (RMC) step, RF Test can be executed.
Measurement is started on the Measuring screen shown in
Figure 5-34.
Figure 5-34 [Manual Test: Measuring] BS Call RMC Screen
Softkey Field
Softkey Menu
Trigger Sing/Cont: Selects the trigger mode from "Sing" (single)
and "Cont" (continuous). This softkey is activated only at the
Connection (RMC) step.
• When the trigger mode is changed from "Sing" to "Cont",
continuous measurement starts.
• When the trigger mode is changed from "Cont" to "Sing",
softkey disappears while the measurement is aborted.