User manual

5-76 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
Set the input fields in the screen field according to the following
description of Table 5-21 to change parameters for current test.
Table 5-21 [Manual Test] Connection Screen Input Field
Input Field Description
Measurement item
selection
Sets whether or not to execute a group of measurement items or each measurement item.
• TX Power
• Frequency Error
• EVM, Origin Offset
• BER
Selects "On" or "Off".
• On: Executes the measurement item.
• Off: Skips the measurement item.
In connection status, this setting is available only for BS Call RMC.
RFCH † Sets the uplink channel number to execute a test.
A band symbol is also displayed. Each band symbol corresponds to a band as follows.
• B1: Band 1
• B2: Band 2
• B3: Band 3
• B4: Band 4
• B5: Band 5
• B6: Band6
The allowable range is as follows:
• Band 1: 9600 to 9900 (1920.0MHz to 1980.0MHz)
• Band 2: 9250 to 9550 (1850.0MHz to 1910.0MHz)
12 (1852.5MHz), 37 (1857.5MHz),
62 (1862.5MHz), 87 (1867.5MHz),
112 (1872.5MHz), 137 (1877.5MHz),
162 (1882.5MHz), 187 (1887.5MHz),
212 (1892.5MHz), 237 (1897.5MHz),
262 (1902.5MHz), 287 (1907.5MHz)
• Band 3: 8550 to 8925 (1710.0MHz to 1785.0MHz)
• Band 4: 8550 to 8775 (1710.0MHz to 1755.0MHz)
1162 (1712.5MHz), 1187 (1717.5MHz),
1212 (1722.5MHz), 1237 (1727.5MHz),
1262 (1732.5MHz), 1287 (1737.5MHz),
1312 (1742.5MHz), 1337 (1747.5MHz),
1362 (1752.5MHz)
• Band 5: 4120 to 4245 (824.0MHz to 849.0MHz)
782 (826.5MHz), 787 (827.5MHz),
807 (831.5MHz), 812 (832.5MHz),
837 (837.5MHz), 862 (842.5MHz)
• Band 6: 4150 to 4200 (830.0MHz to 840.0MHz)
812 (832.5MHz), 837 (837.5MHz)