User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-71
Message Field
The following message is displayed in the message field on the
MS Call Connection Response screen.
"Press [Answer] for answer MS Call."
The word surrounded by [ ] in the message field above denotes
softkey.
Explanation
When the Answer softkey is pressed in respond to the call or if
the specified time is over, the tester automatically responds to
the call. The following measurement result is then displayed in
the field right next to "MS Call" step.
• "P": Shown on blue background when call setup is
executed properly and MS Call passes.
• "F": Shown on red background when MS Call fails.