User manual

5-70 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Screen Field
The input field in the screen field can be changed for a new test.
Refer to Table 5-18, “[Manual Test: Stand-by] Screen Input
Field,” on page 5-63.
The information from the mobile phone and the tester, as shown
in Table 5-20, is displayed at the lower left corner in the screen
field.
The following are also displayed on the screen field:
• 3GPP-SYS and SIG-PTN
The 3GPP system and the signaling pattern that are
currently set on the Configuration: Test Condition
screen are displayed at the lower-right corner of the
screen.
• RF On indicator
"RF On" indicator at the lower-left corner of the screen is
displayed only when the RF signal from the tester is
output to the RF In/Out connector.
Table 5-20 MS Call Connection Response Screen Mobile Phone
Information
Item Information Description
IMSI Displays the default value of International Mobile
Subscriber Identity received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call
execution.
Dialed No. Displays the dial number dialed from the mobile phone.
PRACH Power Displays the dial number dialed from the mobile phone.
CPICH RSCP Displays CPICH received code power reported from the
mobile phone.