User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-69
MS Call Connection Response Screen
If the "Connection Wait" field on the [Configuration: Test
Condition] screen is set to a number other than 0, the screen as
Figure 5-30 is displayed when manually responding to the call
from the mobile phone becomes acceptable on the Tester.
Figure 5-30 [Manual Test: Measuring] MS Call Connection Response
Screen
Softkey Field
Softkey Menu
Answer: Responds to the call from the mobile phone if this
softkey is pressed within the specified time.
This is not displayed until manual response becomes to be
allowed. Also, this is not displayed in the case of immediate
automatic response setting ("Connection Wait" is set to 0). After
the specified time is over, the Tester automatically respond to
the call.