User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-65
† The changing magnification softkey is activated. Refer to “Storing Numeric
Values" on page 4-10 and “Changing Magnification Softkey" on page 4-13.
The information from the mobile phone and the tester is
displayed at the upper right corner in the screen field. The
description of the displayed information is shown in Table 5-19.
Caller ID Sets if the Tester displays an addresser number on the screen or not.
• On: Displays the number
• Off: Not display the number
Averaging Averages respective measurement values of Frequency Error and EVM.
Set the averaging number from 2 to 99 or "Off".
When this function is not required, select "Off".
BER Frames † Sets the number of test frames for BER measurement. The allowable range is from 1 to 4100
in 1 step. (1 Frame = 1 TTI)
Also, a bit number according to BER Frames is displayed between parentheses. The bit
number is calculated by an equation "BER Frames multiplied by 244". While BER Frames is
entered, The bit number is displayed in conjunction with the value of BER Frames.
CPICH RSCP Sets whether or not to display the value of CPICH received code power reported from the
mobile phone.
Select "On" or "Off".
• On: Display the value of CPICH RSCP and also activates the Measurement CPICH RSCP
softkey in the connection status.
• Off: Not display the value of CPICH RSCP.
If this is set to "On" in the Stand-by status, the value of CPICH RSCP is reported once after
MS or BS call is started and displayed on screen.
Table 5-18 [Manual Test: Stand-by] Screen Input Field
Input Field Description
Table 5-19 [Manual Test: Stand-by] Screen Mobile Phone Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity
received from the mobile phone.
IMEI Displays the International Mobile Station Equipment
Identity received from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call
execution.
Dialed No. Displays the dialed number received from the mobile
phone at MS call execution.
PRACH Power Displays PRACH Power transmitted from the mobile
phone.