User manual

5-62 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
Location Update: Executes the location update process for the
Tester.
BS Call: Executes BS Call. A type of BS Call can be selected at
the "BS Call" input field at the bottom of the screen.
• When type of BS Call is set to "AMR", the test step goes
to the "Connection (AMR)". In this case, voice loop back
test is executed.
• When type of BS call is set to "RMC", the test step goes
to the "Connection (RMC)". In this case, the RF test is
executed.
Clear Status: Clears Pass/Fail measurement results at signaling
steps in the test flow.
Trigger Sing/Cont: Selects the trigger mode from "Sing" (single)
and "Cont" (continuous).
• The "Sing" mode setting provides single measurement in
RF test.
• The "Cont" mode setting provides continuous
measurement in RF test.
Trigg er : This softkey is inactivated on the [stand-by] screen. This
softkey is activated in the Connection (RMC) status to start
measurement.
More (1 of 2): Displays the softkey menu 2.
Return: Returns to the [Initial] screen.
Softkey Menu 2
Print Screen: Prints a hardcopy of the screen or saves an image
file of the screen into a USB memory device depending on the
setting of the "Printer" input field on the [Configuration] screen.
RF Output On/Off: Selects the RF power output from "On" and
"Off". When it is set to "On", it is set to the value of BS Level.
When it is set to "OFF", the value is set below -120 dBm.
System >>: Displays softkey menu 3 to select system.
SMS: Displays the [SMS] screen.
More (2 of 2): Returns to the softkey menu 1.