User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-59
Manual Test
Overview
Manual Test Features
• Each test item can be executed manually.
• In the Manual Test, all test items are executed while the
mobile phone and the Tester are connected by call
control protocol.
• The following systems can be selected directly from the
Manual Test screen. Required options are in
parentheses.
• GSM (G00), GPRS (G00), EGPRS (G00, G03), HSDPA
(W00, W06), cdma2000 MC-1x (C00, C01), cdma2000
1xEV-DO (C00, C01, C02)
• Using the System Handover function, change to GSM
during connecting can be executed.
Setting Manual Test in the Configuration Mode
• Loss:
The path loss values for each band can be entered on the
[Configuration: Test Condition (Loss)] screen to correct the
RF attenuation between the mobile phone and the Tester.
Refer to
“Actual Input/Output Level and Correction" on
page 4-19 for correction of input/output signal.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
test limits set in the [Configuration: Test Condition] screen.