User manual

5-58 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
The following are also displayed in the screen field.
• 3GPP-SYS and SIG-PTN
"3GPP System" and "Signaling Pattern" currently set on
the Configuration: Test Sequence and Configuration:
Test Condition screens respectively are displayed on the
lower-right corner of the screen.
• RF On indicator
"RF On" indicator at the lower-left corner of the screen is
displayed only when the RF signal from the tester is
output to the RF In/Out connector.
Message Field
The following message is displayed on the Stand-by
Measurement Result screens:
"Press [Start] to begin a test."
The word surrounded by [ ] in the message field above denotes
the softkey.