User manual

Screen Reference 5
N9360A Multi UE Tester W-CDMA User Manual 5-57
† The changing magnification softkey is available. Refer to “Storing Numeric Values" on
page 4-10 and “Changing Magnification Softkey" on page 4-13.
The information from the mobile phone and the tester is
displayed at the upper right corner in the screen field. The
description of each item can be found in Table 5-13.
RFCH † Sets the uplink channel number to execute a test.
A band symbol is also displayed. Each band symbol
corresponds to a band as follows.
B1: Band 1
B2: Band 2
B3: Band 3
B4: Band 4
B5: Band 5
B6: Band6
The allowable range is as follows:
Band 1: 9600 to 9900 (1920.0MHz to 1980.0MHz)
Band 2: 9250 to 9550 (1850.0MHz to 1910.0MHz)
12 (1852.5MHz), 37 (1857.5MHz),
62 (1862.5MHz), 87 (1867.5MHz),
112 (1872.5MHz), 137 (1877.5MHz),
162 (1882.5MHz), 187 (1887.5MHz),
212 (1892.5MHz), 237 (1897.5MHz),
262 (1902.5MHz), 287 (1907.5MHz)
Band 3: 8550 to 8925 (1710.0MHz to 1785.0MHz)
Band 4: 8550 to 8775 (1710.0MHz to 1755.0MHz)
1162 (1712.5MHz), 1187 (1717.5MHz),
1212 (1722.5MHz), 1237 (1727.5MHz),
1262 (1732.5MHz), 1287 (1737.5MHz),
1312 (1742.5MHz), 1337 (1747.5MHz),
1362 (1752.5MHz)
Band 5: 4120 to 4245 (824.0MHz to 849.0MHz)
782 (826.5MHz), 787 (827.5MHz),
807 (831.5MHz), 812 (832.5MHz),
837 (837.5MHz), 862 (842.5MHz)
Band 6: 4150 to 4200 (830.0MHz to 840.0MHz)
812 (832.5MHz), 837 (837.5MHz)
"---": Skip
Table 5-16 [Auto Test: Stand-by] Measurement Results Screen
Input Field (continued)
Input Field Description