User manual

5-52 N9360A Multi UE Tester W-CDMA User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
Screen>>: Displays the softkey menu 2 containing the softkeys
to select a display mode.
Abort: Aborts the test and returns to the [Stand-by] screen.
Softkey Menu 2
Simple: Displays a Pass/Fail result of whole measurement in the
middle of the measurement result field in zoom.
Detail: Displays a Pass/Fail result at each item cell in the
measurement result field.
Value: Displays a measurement value at each item cell in the
measurement result field.
Cancel: Cancels selecting a display mode and returns to the
softkey menu 1.
Screen Field
The information from the mobile phone and the tester is
displayed at the upper right corner in the screen field. The
description of the displayed information is shown in Table 5-14.
Table 5-14 [Automatic Test] Sequence 2 Screen Mobile Phone
Information
Item Information Description
IMSI Displays the default value of International Mobile
Subscriber Identity. The preset value is 001010123389980.
IMEI This field remains blank at this state.
Caller ID Displays addresser number sent from the tester at BS Call
execution. The set value is displayed at this state.
Dialed No. This field remains blank at this state.